The last two weeks have been all about the interior of the boat. Now, with fillets and fiberglass in place, some sanding and 3-ish coats of epoxy it’s time to share the love on the exterior. Next up, a full fiberglassing of the outer hull. Lots of sanding and smoothing to do before that happens.
Copper stitches
-
- Sanding out little imperfections so the big imperfections really get noticed
-
- Curing the epoxy coat under lights
-
- Warm glow…
-
- Gluing in the deckbeam
-
- Carlins glued in between tabs- temporarily using the noseblock to help with the clamping
-
- Carlins glued and clamped in place, outlining the cockpit
-
- Her first bit of sun. Time to flip and de-wire
-
- Pinboat needs a trim
-
- Many wires to clip
-
- Starting to look like a hull
Leave a Reply